HI i was mowing when my deck stopped . I drove back to my yard to work on what just happend as the deck would not restart with the switch, the switch tested ok , and the clutch all is well, however not i turn the key and nothing no a click the battery is 13 volts and ok
does anyone have a schematic for this ,
the safety system is all testing ok as switches go . turn the key and nothing .
If I tested the breaker right its good I pass tone through iton dmm. Clutch switch seems sketchy but
I hooked the whites together and still no power . I tested the key it seems to switch and pass signal. The pto sw seems unknown as I dont have a pin out for this stuff. Also there is a round item next to the solenoid. Unknown item as well the wiring at the back on the solenoid.
