Is there a way to install a self propelled on to a Non self propelled frame?
The frame is a Murray M2255fc 22"
The self propelled engine is a 5.0hp B&S YBSXS 1901VC
#2
ILENGINE
The engine will bolt to the deck no problem. the only thing you need to determine is the crankshaft length and diameter the same. cable length could be a consideration as well.
The engine will bolt to the deck no problem. the only thing you need to determine is the crankshaft length and diameter the same. cable length could be a consideration as well.
For the crankshaft there are ways around that, I havnt gone deep into it yet, but going to see if I can pull the pulley out, if so then I will drop it in and work from there, cable length may be a issue but not sure till its install, and there are way around the cable issue
