Sealed hydrostatic transmission

[shurguywutt]

Do you think it would be possible suck the oil out on 2200s. Or do you have to remove them.

Most definitely. The 2100s and the 2200s are pretty much the same transaxles. Just be sure to get them hot first so the oil is easier to suck out. Also be sure to put the same amount in that you take out. Once done, do the air purge procedure that is in the manual. Do this by putting the axles in neutral and running them foward and reverse for a few seconds about 20 times. Try your best to keep everything clean and not introduce dirt into the system.

 

[Nuclear]

Most definitely. The 2100s and the 2200s are pretty much the same transaxles. Just be sure to get them hot first so the oil is easier to suck out. Also be sure to put the same amount in that you take out. Once done, do the air purge procedure that is in the manual. Do this by putting the axles in neutral and running them foward and reverse for a few seconds about 20 times. Try your best to keepT everything clean and not introduce dirt into the system.

 

[Nuclear]

Th
Thank you. The fill hole in a 2017 Hustler Raptor Limited to pretty hard to get to but I'm going to try to get it changed.

 

[shurguywutt]

You can try using an 'oil syringe' that you can get off amazon for ~$10 which might make it easier.

 

[Nuclear]

You can try using an 'oil syringe' that you can get off amazon for ~$10 which might make it easier.

Yes, I just bought one. Thanks

 

[Nuclear]

Most definitely. The 2100s and the 2200s are pretty much the same transaxles. Just be sure to get them hot first so the oil is easier to suck out. Also be sure to put the same amount in that you take out. Once done, do the air purge procedure that is in the manual. Do this by putting the axles in neutral and running them foward and reverse for a few seconds about 20 times. Try your best to keep everything clean and not introduce dirt into the system.

Thank you.