RZT 50" LH Hydrostatic trans replacement

[BT2 Zeke]

My 2007 RZT 50" LH drive is giving up the ghost. I'm getting pricing on the updated replacement unit. My questions are:

1) Do any of you that have done this replacement have a recommendation for a retailer that reliable & reasonably priced?

2) Is the new updated unit going to need a new hub or will the hub off of the existing unit swap over?

Thanks in advance.

Zeke

 

[fixit1ddh]

I would say without hub.

OEM Hydro Gear LH EZT Transmission (G18),ZC-DMBB-4DDC-2PPX,918-04431B | eBay

New LH Transmission for Zero Turn Mowers. Note: It is important to replace the oil and oil filters and flush the hydraulic system before replacing the pump. The new pump must be filled with oil prior to installing and starting up.

www.ebay.com

 

[fixit1ddh]

Your old hub if not damaged should swap over.