cleanriver
Forum Newbie
- Joined
- Jul 8, 2018
- Threads
- 2
- Messages
- 3
I have a Craftsman push weed-wacker. The belt that drives the cutter was slipping so I replaced it.
It was snug and worked well for a couple hours of running.
But now, it is not tight on the spindle any more, and it won't spin the cutting head.
The spindles on both ends (engine and cutter head) are solidly bolted, so I dont think the problem is that the distance between the spindles changed.
I don't smell any belt burning....so I am at a loss.
I would appreciate any advice.
Thanks,
John
It was snug and worked well for a couple hours of running.
But now, it is not tight on the spindle any more, and it won't spin the cutting head.
The spindles on both ends (engine and cutter head) are solidly bolted, so I dont think the problem is that the distance between the spindles changed.
I don't smell any belt burning....so I am at a loss.
I would appreciate any advice.
Thanks,
John