Repairman needed

StarTech

Lawn Royalty
Joined
Feb 19, 2020
Threads
80
Messages
10,296
I used to try sell restored equipment too but all I got was insulting offers. So I quit trying now people are wanting to know if got anything for sale but sorry I don't as I part everything out now. I am not spending my time and money repairing a piece of equipment just to be insulted.

Funny thing my brother could half a## repair them and sale for the same price as the ones I tried to sell and mine where much better condition.

I follow some facebook page that offers help to those with small engines. And the help that offered, well it's many times "chuckle worthy." Other times it'll just piss you off.
One guy posted a video of his Kawasaki twin smoking like a freight train. One of the "advisors" told him to use 20w-50.
Kawasaki does spec SAE20w50 or 15w50 full synthetic for those engines but that doesn't resolve heavy smoking of a worn out engine. Matter of fact I just got in 5 gallons of the Kawasaki synthetic oil with zinc additive so it can restore some of the cylinder damage.
 

mikehouse

Well-Known Member
Joined
Jun 13, 2015
Threads
51
Messages
243
So tell us EXACTLY what naughtyness it is up to.
There is enough brainpower & experience here to get just about anything back up & running.
IF you don't know what part is called just take a photo of it .
It is amazing just how many people who have never held a screwdriver in their hands have done a full strip down & rebuild under the guidance of the people here .
There is no problem too bit or too small that can not be fixed here.
No question too silly or trivial that it will not get answered .
My FWD self propel
Yellow pages, call & ask how long they have been in business & how much they charge for a complete tune-up. Let us know how it goes, thanks, Mark


Post your complete model number from mower. Also post engine make: example B&S, model xxxxxx, type xxxx-xx, code xxxxxxxx
This Craftsman is a FWD 22" mower.#917.377131.Self oropel won't engage.I have been thinking it is the pulley for the belt.Since SearsParts is no more,pulley is unavailable.Wheel gears are good as the wheels are still new.It was suggested maybe it's the transmission.
 

PTmowerMech

Lawn Addict
Joined
Apr 16, 2018
Threads
397
Messages
3,029
I used to try sell restored equipment too but all I got was insulting offers. So I quit trying now people are wanting to know if got anything for sale but sorry I don't as I part everything out now. I am not spending my time and money repairing a piece of equipment just to be insulted.

Funny thing my brother could half a## repair them and sale for the same price as the ones I tried to sell and mine where much better condition.


Kawasaki does spec SAE20w50 or 15w50 full synthetic for those engines but that doesn't resolve heavy smoking of a worn out engine. Matter of fact I just got in 5 gallons of the Kawasaki synthetic oil with zinc additive so it can restore some of the cylinder damage.

I spent years in sales. Everything from Houses to Kirby vacuum cleaners. My sales rate is probably 90%.
The John Deere I picked up from the scrap yard, with the intek pro, is one butt ugly mower. But it was only $20. The paint on it is about as bad as I've ever seen. But I have three people lined up for it, when I get the deck finished up.
Picked up a good Husqvarna z246, two Husq trimmers, two chainsaws, a homelite trimmer and a backpack blower for $300 a couple of weeks ago, from someone getting out of the lawn care business (lol before the season started). Already have $700 profit on those, and still have 3 left to sell.
I sold the zero turn way to cheap. As soon as I listed it ($900), people on facebook were fighting over it. First one here, with the cash, live 1.5 hours away.
There's good money it them, all season long. During the winter, it's a great time to buy them dirt cheap, and fix them up. I wished I had 20 riders right now, cause I'd have them sold in a couple of weeks. At an average of $350 each profit, with usually less than $100 in parts and 1 to 2 hours labor, how can you turn that down?


This Kawasaki, if it was ring damage, or anything else, changing oil viscosity wasn't going to change much of anything. BTW, the one who said to change the oil, didn't even know what oil was in it, when he said to change it. The one who posted the video didn't list that information. I guess the point of this, was on that facebook page, about 90% of all the advice is just guesses, from people who don't work on them.
You know the type. One's that pay more attention to the comic strip of Taryl's skit, than they do the information he gives.
 

PTmowerMech

Lawn Addict
Joined
Apr 16, 2018
Threads
397
Messages
3,029
My FWD self propel

This Craftsman is a FWD 22" mower.#917.377131.Self oropel won't engage.I have been thinking it is the pulley for the belt.Since SearsParts is no more,pulley is unavailable.Wheel gears are good as the wheels are still new.It was suggested maybe it's the transmission.

When you say won't engage, I imagine you're saying the cable is working fine. But the belt won't get tight around the pulley. If the belt tightens enough to turn the trans pulley, and it's still not working, then you might remove it from the mower, and take it to a small engine shop that has parts mowers in the back and ask if they have a good used on.
I've tried my hand as repairing them, and never had any luck. The guy I worked for, who was certified by many Brands, didn't mess with them. His friend, who always came by the shop, (who has at least 30 years in the business) said he stopped trying to fix them a long time ago.
The guts look simple enough. But I never could get one right. So when one would come in, with a bad trans, i'd take one off a parts mower (everything except the wheels) and install it on the customers mower. And let it go at that.
 

Hammermechanicman

Lawn Addict
Joined
Jan 10, 2020
Threads
56
Messages
3,533
I follow some facebook page that offers help to those with small engines. And the help that offered, well it's many times "chuckle worthy." Other times it'll just piss you off.
One guy posted a video of his Kawasaki twin smoking like a freight train. One of the "advisors" told him to use 20w-50.
Then you get "some guy on the internet" with a name like hammer mechanic (that can't be encouraging) giving out advice and probably hasn't got a clue.
 

HarmonySeeker

Well-Known Member
Joined
Feb 19, 2020
Threads
3
Messages
108
I used to try sell restored equipment too but all I got was insulting offers. So I quit trying now people are wanting to know if got anything for sale but sorry I don't as I part everything out now. I am not spending my time and money repairing a piece of equipment just to be insulted.

Funny thing my brother could half a## repair them and sale for the same price as the ones I tried to sell and mine where much better condition.


Kawasaki does spec SAE20w50 or 15w50 full synthetic for those engines but that doesn't resolve heavy smoking of a worn out engine. Matter of fact I just got in 5 gallons of the Kawasaki synthetic oil with zinc additive so it can restore some of the cylinder damage.

FYI, if you can get some Never-Seize or molybdenum paste, that has been successfully used for that purpose, as well.
 

ILENGINE

Lawn Royalty
Joined
May 6, 2010
Threads
39
Messages
10,063
I used to try sell restored equipment too but all I got was insulting offers. So I quit trying now people are wanting to know if got anything for sale but sorry I don't as I part everything out now. I am not spending my time and money repairing a piece of equipment just to be insulted.

Funny thing my brother could half a## repair them and sale for the same price as the ones I tried to sell and mine where much better condition.


Kawasaki does spec SAE20w50 or 15w50 full synthetic for those engines but that doesn't resolve heavy smoking of a worn out engine. Matter of fact I just got in 5 gallons of the Kawasaki synthetic oil with zinc additive so it can restore some of the cylinder damage.
Nothing like people looking for $100-150 riding mowers, or $20 push mowers.
 

StarTech

Lawn Royalty
Joined
Feb 19, 2020
Threads
80
Messages
10,296
Definitely nothing like it. I had one last said "I can buy them at yard sales all day long for $20" to which I said "Then why are you here?" and then I show him to way out.
 

bertsmobile1

Lawn Royalty
Joined
Nov 29, 2014
Threads
64
Messages
24,705
My FWD self propel

This Craftsman is a FWD 22" mower.#917.377131.Self oropel won't engage.I have been thinking it is the pulley for the belt.Since SearsParts is no more,pulley is unavailable.Wheel gears are good as the wheels are still new.It was suggested maybe it's the transmission.

Take the cover off and turn the transmission pulley by hand with the S/P engaged the mower should just about go 1:1 wheels to pulley.
Sears did not make that mower some one else did and all they did was fit the engine sears specified and paint it the colour sears specified.
The 917 code means that Roper designed it and AYP ( Husqvarna ) made it .
SO it is fixable if it s not all that old.

IF you are lucky som one with access to a trade portal can do a cross to another model so we can see if your parts are available.
he simple test is to tie off the engage lever / bail whatever .
Pull the spark plug out . remove the cover over the transmission and pull on the starter rope .
You are looking to see if the belt turns the pully.
IF it does then undo the drive and turn the pulley on the transmission and see if it moves the axel & wheels

Let us know how it goes.
 
Top