Bill Sinclair
Forum Newbie
- Joined
- Aug 26, 2018
- Threads
- 1
- Messages
- 3
Hi, I have a Poulan Pro 4218 that I have "re-conditioned".
It has a new flywheel/coil, a new carb, new fuel lines and filter, new air filter, new spark plug and fresh mixed gas.
Once done I started it, adjusted the carb and cut some wood. It quit running and will not re start. I suspected I flooded it trying to restart so I've let it sit with the spark plug out for a few days and pulled the rope repeatedly to be sure the cylinder was empty. I put the plug in the boot and grounded it and pulled the rope and have a consistent bright spark. put the plug back in and it still will not re-start.
I'm at a loss. Any ideas?
thank you
It has a new flywheel/coil, a new carb, new fuel lines and filter, new air filter, new spark plug and fresh mixed gas.
Once done I started it, adjusted the carb and cut some wood. It quit running and will not re start. I suspected I flooded it trying to restart so I've let it sit with the spark plug out for a few days and pulled the rope repeatedly to be sure the cylinder was empty. I put the plug in the boot and grounded it and pulled the rope and have a consistent bright spark. put the plug back in and it still will not re-start.
I'm at a loss. Any ideas?
thank you