I just purchased a Steiner with a 20hp onan. I know these parts are very hard to come by. I am trying to find a crank bushing for it. Does anyone know who I could contact to try to get one. I’ve tried onanparts.com with no luck. I’ve also tried my local Steiner dealer with no luck. Thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Onan on a steiner
- Thread starter Jehrets
- Start date
All I could find is engine description 20hp P220G Onan Performer and the engine model P220-1/11162H. The bushing itself has 3 different sets of numbers on it 0415 11-87(I think this is date of manufacture because the machine is an 88’) and F-148. Hope this helps.Please post the engine numbers and the part number (if you have it) of the crank bushing.
Take a look at this parts book and see if you can tell me the part number for the part you are looking for. https://manuals.casecoltingersoll.com/ServiceManuals/Onan P216-218-220 onan-parts.pdf
Only you can tell whether it is the correct part or not. Those bushings do have holes in them, do a google search with the part number and you’ll get a better picture. If you notice there are 5 different bushings so you must determine the correct size before ordering anything.
ok thank youOnly you can tell whether it is the correct part or not. Those bushings do have holes in them, do a google search with the part number and you’ll get a better picture. If you notice there are 5 different bushings so you must determine the correct size before ordering anything.