well the nozzle came out pretty easy, it was in some sea foam for a few days. Turns out the carb itself was in great shape, the fuel tank needed a good pressure wash and the closer valve was fouled. After it was back together it popped up on the second pull.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Old B&S engine model
- Thread starter GPB
- Start date
More options
Export threadFor what it's worth - I have model# 82902, 0247, which does have the carb w twin stacks in the gas tank. 1964 vintage I believe. - callhowI double checked the numbers and they are correct with what is stamped on the flywheel cover. Odd thing is that parts diagram shows it having a tank mounted carb, where the carb on this unit is a flowjet?? Maybe someone found the flywheel from one engine and it just happened to fit the other?? This could get fun.
bertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 64
- Messages
- 24,705
Very common to find a blower housing on the wrong engine.
You have to be a little caeful when using them on engines of unknown source.
You have to be a little caeful when using them on engines of unknown source.
Captn Cliffy
Member
- Joined
- Dec 3, 2010
- Threads
- 8
- Messages
- 29
61102 would be a horizontal engineHere is the catch Both the 82902 and the 61102 are blower housing originally off of vertical engines not your horizontal engine.
Must of had something on my mind when I typed that. Odd/even number thing on my mind.61102 would be a horizontal engine