Not sure how this works.

L

LeeG

Forum Newbie
I have a Toro/Wheelhorse 522xi that doesn't like to reengage the mower-deck after stopping it (or backing up) after it has been run for awhile ( and is hot). Any ideas?
 
If you have an electric PTO, it may have a hot short or open, by which I mean, the PTO coil is either shorting to ground or breaking open when it gets hot. After it cools down, it contracts, making a good connection and works properly again. I have also seen PTO switches do the same thing.
 
Toro Won't Re-Engage Mower Deck

Welcome to LawnWorld!

We moved your thread to the Toro/Wheelhorse forum.
 
Rivets said:
If you have an electric PTO, it may have a hot short or open, by which I mean, the PTO coil is either shorting to ground or breaking open when it gets hot. After it cools down, it contracts, making a good connection and works properly again. I have also seen PTO switches do the same thing.
Click to expand...

Sounds right. Any idea how to Find/Get to the PTO coil?
Thanks
 
You must log in or register to reply here.
Back
Top