Noob question - FL20 spool

[whacky]

Hello, new to this forum and hoping for some help. I bought a used Weed Eater FL20 (2003 model) and got it running well. I'm just not too sure what line spool is compatible. There is a head on the bottom, and it looks like a line spool just clips in. My local hardware stores have fairly limited selection. Thanks for any help.

 

[ILENGINE]

This should be the spool https://www.partstree.com/parts/poulan-952711527/

And complete diagram for the head https://www.partstree.com/models/fl...er-type-1-2009-03/cutting-equipment-type-1-0/

 

[StarTech]

And if you a whole head assembly it is NLA and none of aftermarket sources has one for that one with 5/16-24 threads so it is time to look for a used one in that case.

Also there is a small version and a large version with the same threading.

 

[whacky]

This should be the spool https://www.partstree.com/parts/poulan-952711527/

And complete diagram for the head https://www.partstree.com/models/fl...er-type-1-2009-03/cutting-equipment-type-1-0/

Thank you!

 

[whacky]

And if you a whole head assembly it is NLA and none of aftermarket sources has one for that one with 5/16-24 threads so it is time to look for a used one in that case.

Also there is a small version and a large version with the same threading.

Thank you!