Does not appear to be getting spark at the plug. I pulled off the flywheel expecting to see stuck points. There were no points. Disconnected the Stop Switch as I thought it might be grounding out. Do the Armature-Magnetos give much trouble on these?
Would like to find repair manual info to test the Armature-Magneto before spending $50+ on a 20 year old machine.
Also, would like to know the correct Spark Plug for this engine.
Any help appreciated.
#2
pugaltitude
Not common for coils giving problems.
Check the wire from stop switch to coil has not chafed through.
Also to check spark then you need a spark tester.
Holding plug against engine will not test it correctly.
Plug should be a Champion RJ19LMR.
#3
ILENGINE
Disconnect the kill wire on the module, crank engine with know good spark plug. No spark replace module. They do fail on occasion.
