Need source for blade drive pulleys for Rider 14 PRO with 41" deck-2000 model?

P

Pro Mike 14

Forum Newbie
As the title says I had a brain fart and forgot my mower was not a brush hog. I found some in Italy a couple years ago and lost the source info.
Mike
 
The 38" deck spindle pulleys? And are you in Europe? If so there is a place in the Netherlands that has online site.
 
StarTech said:
The 38" deck spindle pulleys? And are you in Europe? If so there is a place in the Netherlands that has online site.
Click to expand...
No, I have the 41" mulching deck. I think they are different. 41" pulleys are driven by Gilmer belts.
I am in Michigan, USA. Thanks for the response!
Mike
 
Yuck what a system with timing belts. Jack's is fairly close and in the US (Maryland) so no high shipping charges.

https://www.jackssmallengines.com/j...ride-mower/rider-14-pro-2000-02/deck-41-mulch

1778670610862.png
PN 506930901. Looks like some kinda casted material. And looks like there is a total 6 pulleys of this design. Definite pricey so no more bush hogging.;)

Now for availability I don't know. My distributor says NLA but they just say that when they are not authorize to buy the parts sometimes so give Jack's a call to verify that they can get them.
You can also look up any of the other parts for the mower there.
 
StarTech said:
Yuck what a system with timing belts. Jack's is fairly close and in the US (Maryland) so no high shipping charges.

https://www.jackssmallengines.com/j...ride-mower/rider-14-pro-2000-02/deck-41-mulch

View attachment 73313
PN 506930901. Looks like some kinda casted material. And looks like there is a total 6 pulleys of this design. Definite pricey so no more bush hogging.;)

Now for availability I don't know. My distributor says NLA but they just say that when they are not authorize to buy the parts sometimes so give Jack's a call to verify that they can get them.
You can also look up any of the other parts for the mower there.
Click to expand...
My husqvarna distributor shows NLA also and they are an official Husqvarna distributor.
 
Gardner is too but I can't any of the Husqvarna chainsaw parts from them. They just list them as NLA even I get them though Jack's.
 
StarTech said:
Gardner is too but I can't any of the Husqvarna chainsaw parts from them. They just list them as NLA even I get them though Jack's.
Click to expand...
Im a HCP service center so have access to Husqvarna parts not exclusively used on Husqvarna branded products. If I tryt to purchase a Husqvarna exclusive part my distributor gives me the restricted warning.
 
So far this year the only problem was a few Hustler parts which is also used on Cub Cadet. Darn vendor cancelled them off my order and didn't even tell me. They can be exclusive to Cub Cadet when they are used on a Hustler. Anyway the distributor lost the sale as I found them otherwise at nearly the same price.

Today its Partzilla telling the screws I need to reattach a water on a Kawasaki Mule are not available. I then ran the PNs thru my database and found they were superseded to new PNs so the four nearly rusted in two screws are now on order with the rest of the $300 in parts I need. Apparently the pump gasket failed around the screws.
 
I've owned this machine for 26 years now and I was hoping to use it till I die! I found my past source today and they have some in stock but,
they are not selling to US addresses. I sent a plea. My fingers are crossed.
Mike
 
StarTech said:
Yuck what a system with timing belts. Jack's is fairly close and in the US (Maryland) so no high shipping charges.

https://www.jackssmallengines.com/j...ride-mower/rider-14-pro-2000-02/deck-41-mulch

View attachment 73313
PN 506930901. Looks like some kinda casted material. And looks like there is a total 6 pulleys of this design. Definite pricey so no more bush hogging.;)

Now for availability I don't know. My distributor says NLA but they just say that when they are not authorize to buy the parts sometimes so give Jack's a call to verify that they can get them.
You can also look up any of the other parts for the mower there.
Click to expand...
I went to Jacks site and ordered 4. Thanks!
Mike
 
You must log in or register to reply here.
Back
Top