That is what I was thiniing, that it would most likely be fuel problem.
I don't think it is the carb. Just in case I did take the carb completely apart and cleaned the entire carb with BERKEBILLE Instant GUM CUTTER. Made sure none of the holes were clogged. They appear to all be flowing smoothly. I also double checked the flywheel and magneto spacing, that appears to be coorect, and I am also getting spark. Could it be possible that motor oil is leaking into the cylinder, which could possibly be making it too thick to ignite and give me continuous combustion? And I do believe the choke is working. After 3 pulls it will start and attempt to run but wont stay running.
And when I had the engine apart the is a small lever like arm inside the engine, would that be the govenour? And where should it be set at inside the engine?