Maintanceman

2 things.
1. What are you calling a charge pump. Hydro Pump? I have never heard of a charge pump in my neck of the woods.
2. Need serial number
 
The charge pump is what my friend called it but it is the hydro pump what i need to know is how do i bleed the air out of the right side the left side works good but the rt. don't engage at all so please can you help thanks
 
I dont know if this is your exact model but I found this for beading air after oil change.
Raise the rear of machine up and support with jack stands (or equivalent
support) just high enough to allow drive wheels to turn freely.
g) Start engine and move throttle control ahead to full throttle position.
Move the speed control levers to the full speed and run for several
minutes. Shut down machine and recheck oil level.

On my Husqvarna you raise rear of mower run full forward then full backwards 5 or 6 times to bleed air.
 
handyman357.lw said:
The charge pump is what my friend called it but it is the hydro pump what i need to know is how do i bleed the air out of the right side the left side works good but the rt. don't engage at all so please can you help thanks
Click to expand...

I went back over the mower and found one of the low pressure line was sucking air so i need a eXmart part # 1-413273 do you keep it in stock if so please email me price and availability thank you for your time.
 
You must log in or register to reply here.
Back
Top