LGT2645- Wiring

[StarTech]

One those appears to Brown. If so it come off the light switch and goes to the headlamps. Ignition switch mus in the run position and light switch on to test for 12v.

Also if the clicking is not the starter solenoid then it is either the fuel solenoid on the carb or the PTO clutch. Check and make to the PTO switch is off. Plus the brake/clutch must be fully depessed.

 

[STEVES]

Hello all,

I have an LGT2654. We have wiring that is not connected. Trying to see where it goes to.

Anyone have a schematic for this mover?

Attached are pics of the wiring and where it starts to go. I see that it leads to the ignition area.

Any idea about where this goes to? what it does on the mower? And where should it end at?

What is the issue? What is not working or not doing?

 

[toolboxhero]

Are you having a problem with the tractor or are you just curious about the wires not being connected?

Typically, Husqvarna used the same wiring harness for many different models of Husqvarna, Craftsman, Poulan Pro, and Ariens lawn tractors. Some of the models had different gauges, safety switches, lights, etc. The extra wires/plugs are most likely for those other options.