My neighbor lady has this mower and while using the transmission belt broke so the self propelled stopped. I told her I would be glad to replace the belt for her and took it home. I took the covers off and lo and be hold there are 2 bels, a drive belt and transmission belt. You have to take the drive belt off to get the trans belt off which I did put it back together and now when I start it it runs fine, self propels fine and then I shut it off and I can't restart it. It feels like something is keeping mr from pulling the cord fast enough to start the engine. Can any one offer suggestion or tell me what I did wrong!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Lawn boy model 10605 self propelled mower belts replacement
- Thread starter BackAtOne
- Start date
-
- Tags
- lawn boy replacement
Thanks I'll do itRemove the spark plug and see if it pulls freely. If not you will have to take a look at your belts and see if something changed. When you post back include the serial number, as there are 2 variations of that model. I should have a service manual for your unit.
Here is a service manual for Lawn Boy drive system which might help. https://www.toro.com/getpub/22446
Thank youHere is a service manual for Lawn Boy drive system which might help. https://www.toro.com/getpub/22446
I got the lawn boy up and running. I had the idler pully assembly wrong. You providing me with the service manual made all the difference!! Thanks again Now I need to find the size of the nut that goes on the blade bolt.Thank you