Yes, I disconnected all and sprayed electrical cleaner and put die-electric grease in female ends. The only connector that came loose while shaking wires was the mower clutch connector. I put a tie-wrap around it.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Kohler CV730 fuel delivery issues
- Thread starter Hayward
- Start date
So is there a safety that is out of adjustment? Like when the mower hits a bump, something moves and either presses or doesn't press the plunger and kills the spark?I started it up and shook every wire and connector. nothing happened . ?? It's been raining here all day, I'll ride it tomorrow and heat it up to see if that matters.
Yes, that's what it acts like. I couldn't think of anything other than the seat switch that would do that. I eliminated that switch and it still cuts out. I will keep looking ...So is there a safety that is out of adjustment? Like when the mower hits a bump, something moves and either presses or doesn't press the plunger and kills the spark?
We still don't have a model number or serial number for this particular Craftsman m
After mowing for 45 minutes today, it never cut out. Either I accidently cleared the problem while resetting the connectors or it just decided to act right. I called the neighbor to come get it while the getting was good. Thank all of you for your advice !Look at the safety switches. Some have a nut to adjust the plunger throw. Might have one or three out of adjustment maybe??