PTO clutch will engage for 10 to 15 seconds and then it kicks out. Checked the voltage at the clutch and it has 12 volts. If I disconnect the wires at the clutch the voltage is 12 volts and will stay on continuously. As soon as you put a draw on the circuit it will kick out in approx. 10 seconds. The power going to the blade brake stays on. It has a new clutch and I tried a new switch and it does the same thing. Any ideas?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
JD F932 Pto clutch problem
- Thread starter JD Mower
- Start date
- Joined
- Jul 15, 2013
- Messages
- 7,499
https://www.google.com/search?q=how...5i39j69i59.22926j0j4&sourceid=chrome&ie=UTF-8
https://www.google.com/search?q=how...ome..69i57.31991j0j4&sourceid=chrome&ie=UTF-8
did you check air gap 3 places on new clutch before installing? do not forget to burnish new clutch.
https://www.google.com/search?q=how...ome..69i57.25663j0j4&sourceid=chrome&ie=UTF-8
https://www.greenpartstore.com/John-Deere-Electromagnetic-PTO-Clutch--AM118770_p_3860.html
https://www.greenpartstore.com/John-Deere-PTO-Clutch-Cable--M79733_p_9933.html
did you order this cable per instructions below electromagnetic clutch ?
https://www.google.com/search?q=how...ome..69i57.31991j0j4&sourceid=chrome&ie=UTF-8
did you check air gap 3 places on new clutch before installing? do not forget to burnish new clutch.
https://www.google.com/search?q=how...ome..69i57.25663j0j4&sourceid=chrome&ie=UTF-8
https://www.greenpartstore.com/John-Deere-Electromagnetic-PTO-Clutch--AM118770_p_3860.html
https://www.greenpartstore.com/John-Deere-PTO-Clutch-Cable--M79733_p_9933.html
did you order this cable per instructions below electromagnetic clutch ?
Last edited: