JD F932 Pto clutch problem

[JD Mower]

PTO clutch will engage for 10 to 15 seconds and then it kicks out. Checked the voltage at the clutch and it has 12 volts. If I disconnect the wires at the clutch the voltage is 12 volts and will stay on continuously. As soon as you put a draw on the circuit it will kick out in approx. 10 seconds. The power going to the blade brake stays on. It has a new clutch and I tried a new switch and it does the same thing. Any ideas?

 

[mechanic mark]

https://www.google.com/search?q=how...5i39j69i59.22926j0j4&sourceid=chrome&ie=UTF-8

https://www.google.com/search?q=how...ome..69i57.31991j0j4&sourceid=chrome&ie=UTF-8

did you check air gap 3 places on new clutch before installing? do not forget to burnish new clutch.

https://www.google.com/search?q=how...ome..69i57.25663j0j4&sourceid=chrome&ie=UTF-8

https://www.greenpartstore.com/John-Deere-Electromagnetic-PTO-Clutch--AM118770_p_3860.html

https://www.greenpartstore.com/John-Deere-PTO-Clutch-Cable--M79733_p_9933.html

did you order this cable per instructions below electromagnetic clutch ?

 

[JD Mower]

The new clutch is doing the same thing as the old clutch. Not aware of any adjustments on this style clutch.