I think its a murray, but need help.

Those two pulleys should never touch. Are they still touching with the new belts installed?
 
Either the belt is the wrong length or not routed correctly. I’ll find the length for you.
 
Check the pivot hole.
If it is flogged out oval it will allow the pulleys to move too far.
Also check the clutch tension spring.
They get weak and they also cut a groove in the anchor point which has the same effect.
 
bertsmobile1 said:
Check the pivot hole.
If it is flogged out oval it will allow the pulleys to move too far.
Also check the clutch tension spring.
They get weak and they also cut a groove in the anchor point which has the same effect.
Click to expand...
I apologize if i sound dumb but this is my first time working on mowers. The pivot hole?
 
Rivets said:
You will have to remove the belt to measure it.
Click to expand...
Its the correct length. Sorry had to tear it down. Put it together and move it out to work on golf cart. I really need to clean out the other side of garage lol
 
You must log in or register to reply here.
Back
Top