rotor windings, yes. i couldnt think what they were called. there are some that you can tell they broke.
so there are some broken windings....
I have fuel, spark, adjusted valves, and still won't start!!!! i need help.
- Thread starter fish22
- Start date
rotor windings, yes. i couldnt think what they were called. there are some that you can tell they broke.
so there are some broken windings....
reddragon
Lawn Addict
- Joined
- Jun 4, 2011
- Threads
- 36
- Messages
- 1,377
thats definitely a problem...i think you should get a new or rebuilt one...i dont think its cost effective to get the windings repaired:frown:....hopefully thats your starting problem too!
Having open armature windings is not as bad as having shorted windings... but loosing any is really going to hurt the torque of the motor...
You can use an ohm meter to check on the commutator every pair of segments opposite from each other should show continuity... and should not be making electrical contact to their adjoining segments...
Like reddragon said, it is not practical to have a small armature rewound, unless you have an electric motor re builder in your area.... :smile:KennyV
You can use an ohm meter to check on the commutator every pair of segments opposite from each other should show continuity... and should not be making electrical contact to their adjoining segments...
Like reddragon said, it is not practical to have a small armature rewound, unless you have an electric motor re builder in your area.... :smile:KennyV