I Give Up

B

bartles

Well-Known Member
Ok, I've rebuilt dozens of small engine starters. I bought a "Far Eastern" starter and this was packed with the terminal nuts...what is it for?
 
Sorry, I am technically challenged. If I can figure out how to compress the photo of what I am talking about to get
it to you. It's a flat piece of metal, about 1/2" wide x 3-4" long. one end is bent 90degrees about 1/2". There is a slot in the bent section.

bartles
 
You upload to one the image hosting sites like imgur.com. There you can resize the photos, save it, and then link it. Or use a program like Microsoft paint. But if you are using a smart phone I have no idea how those work.
 
bartles said:
Sorry, I am technically challenged. If I can figure out how to compress the photo of what I am talking about to get
it to you. It's a flat piece of metal, about 1/2" wide x 3-4" long. one end is bent 90degrees about 1/2". There is a slot in the bent section.

bartles
Click to expand...
If it is what i think it is. Some of the early briggs engines used that bracket to mount the starter solenoid on or something similar.
 
You must log in or register to reply here.
Back
Top