Husqvarna linkage problems

A

ajwashere

Member
Joined
Apr 15, 2018
Messages
10
Hi all, I was having carb problems and, like a bone head, I quickly pulled the carb off, not taking pictures as I went. Now I cannot figure out the linkage. I cannot find and good diagrams or pictures on the web either. Does anybody have any info on this rig? Its a Husqvarna YTA24V48 with a Briggs & Stratton 44N877-0003-G1 engine. Any pics link or info would be bigly appreciated!
 
ajwashere said:
Hi all, I was having carb problems and, like a bone head, I quickly pulled the carb off, not taking pictures as I went. Now I cannot figure out the linkage. I cannot find and good diagrams or pictures on the web either. Does anybody have any info on this rig? Its a Husqvarna YTA24V48 with a Briggs & Stratton 44N877-0003-G1 engine. Any pics link or info would be bigly appreciated!
Click to expand...

Does your engine have the thermostat choke or a manual choke on it ?? I have some pics of the the linkages that MIGHT be of help to you... Boobala
 
ajwashere said:
Hello, It has the automatic choke. Pics would be great!
Click to expand...

I will dig out what I have and post a bit later, BUT I will post them, PATIENCE, Please ! wife's Honey-do's have PRIORITY in this house ... :thumbsup:..:wink:
 
No worries! Thank you and thank you rivets for the manual. Mine has a single barrel carb so it is a little different but still helpful. I got the governor to throttle butterfly and choke thermostat to choke figured out. I just have one more long squiggly piece of linkage that I have no idea where it goes. Thanks again
 
Might be the choke link if it has a lot of bends to it or the throttle link
 
2009-07-30_161425_7-30-2009_9-13-19_AM.png..LINKS.PNG..DSCN2705.jpg..DSCN2707.jpg..DSCN2727.jpg..DSCN2732.jpg..DSCN2733.jpg..linkx1.jpg.._carb_bottom_solenoid.JPG..shiny.png

I guess I'm too late but here's the pics anyway......
 
You must log in or register to reply here.
Back
Top