R rothomas Forum Newbie Oct 17, 2021 #1 I have Honda HRR216 VXA mower that stopped self propelling. I replaced the belt and the transmission but no results. Any ideas as to what else I should check?
I have Honda HRR216 VXA mower that stopped self propelling. I replaced the belt and the transmission but no results. Any ideas as to what else I should check?
O olgeezershonda Well-Known Member Oct 17, 2021 #2 Did you check the pulleys to see if they are worn out? An excessively worn pulley will allow the belt to slip.
Did you check the pulleys to see if they are worn out? An excessively worn pulley will allow the belt to slip.
B Briantii Well-Known Member Oct 20, 2021 #3 Also check the pinion gears in the rear wheels. If the ratcheting key isn't moving then it won't go anywhere either.
Also check the pinion gears in the rear wheels. If the ratcheting key isn't moving then it won't go anywhere either.
E enigma-2 Well-Known Member Oct 31, 2021 #4 Probably a silly question, but what's the condition of the engagement cable? Stretched too far? Adjusted properly?
Probably a silly question, but what's the condition of the engagement cable? Stretched too far? Adjusted properly?
