Hello, I’m trying to repair my Honda HRR216k5vxa mower. It was leaking gas and was hard to start so I took the carburetor out and cleaned it. While using the Honda schematic to put it all back together I noticed that I was missing the carburetor insulator that was in the diagram.
My mower has a part that looks exactly like this part however it’s permanently mounted to the engine. I ordered another one and lined everything up according to the diagram however I cannot get the two screws that hold it all together to catch and screw in with the second carb insulator on. When I took the one insulator out, it all screwed in
Did I just read the schematic wrong and my mower has this piece permantly attached? Or does the mower take two of these pieces and im just not lining it up right.
The #schematic is here...the part I’m talking about is #12
https://www.hondalawnparts.com/oemparts/a/hpe/505ce4c5f870022d24bdc92b/carburetor
Thanks for any help. Right now I put it all back together again and it’s still surging a lot but it does run again and doesn’t seem to be leaking gas anymore.
My mower has a part that looks exactly like this part however it’s permanently mounted to the engine. I ordered another one and lined everything up according to the diagram however I cannot get the two screws that hold it all together to catch and screw in with the second carb insulator on. When I took the one insulator out, it all screwed in
Did I just read the schematic wrong and my mower has this piece permantly attached? Or does the mower take two of these pieces and im just not lining it up right.
The #schematic is here...the part I’m talking about is #12
https://www.hondalawnparts.com/oemparts/a/hpe/505ce4c5f870022d24bdc92b/carburetor
Thanks for any help. Right now I put it all back together again and it’s still surging a lot but it does run again and doesn’t seem to be leaking gas anymore.