how to repair bent and broken yoke shaft - exmark & toro 60''

[demhustler]

just kidding : ))) that's trash : ))) Q is - how the hell 1 inch thick shaft on 60'' mower can be bent? : ))) demit ...

 

[577jersey]

Easy,some of these mower go pretty fast,,especially the red ones.........is the driver still intact?? lol??
Years ago I had a castor fall off a walk behind,guess the quick clip came out.. and got ran over by the deck,,the blade put a nice notch in the side of the metal

 

[clpolcar]

Heat it up and bend it back or you can cut the rideout,weld a new 5/8 ot whatever size rod in it and drill a hole through it and put a pin through it

 

[577jersey]

Heat it up and bend it back or you can cut the rideout,weld a new 5/8 ot whatever size rod in it and drill a hole through it and put a pin through it

Yeah,it dont have to be perfect right,,its just a castor...them things are never rolling straight.

 

[clpolcar]

Yeah,it dont have to be perfect right,,its just a castor...them things are never rolling straight.

I mean I would getit straight but as long as it spins on the mower deck
it's fine.