AJ Mattern
Forum Newbie
We just purchased a "returned" lawn Dewalt 40V mower from Lowes because the charger was missing. Wrong. The inside pulley is warped and jacked up. Now we cannot remove the pulley from the spindle! Help! Here's a photo.
How to remove pulley from spindle
- Thread starter AJ Mattern
- Start date
bertsmobile1
Lawn Royalty
Fish
looks like the pulley will be cast onto the shaft.
The shaft has bearings so it can rotate but the pulley is hard on the shaft.
Thus replacing the bearings will be of little use as he still has to replace the broken pulley.
Just another cost cutting exercise but people force the mowr companies to do this because they will not pay a fair & reasonable price for quality durable mowers.
looks like the pulley will be cast onto the shaft.
The shaft has bearings so it can rotate but the pulley is hard on the shaft.
Thus replacing the bearings will be of little use as he still has to replace the broken pulley.
Just another cost cutting exercise but people force the mowr companies to do this because they will not pay a fair & reasonable price for quality durable mowers.
AJ Mattern
Forum Newbie
The diagram I found was broken down. Could you please include the link to the assembly? That is what I am looking for!
ILENGINE
Lawn Royalty
Without the exact model number of your mower, I have no way of knowing if the model I looked at was your model.
AJ Mattern
Forum Newbie
DeWalt 40V DCMW290H1
ILENGINE
Lawn Royalty
Item 13 on this diagram shows the pulley as part of the shaft with the lower bearing. I think that is the same diagram I found before.
https://servicenet.dewalt.com/Products/Detail?productNumber=DCMW290H1#pp-parts
