Export thread

HONDA HRD 536 LAWNMOWER TRANSMISSION PROBLEM. PLEASE HELP!!!

#1

T

the_patriot

hello everyone,

i hope you can help me. i have taken on project to help fix a honda hrd 536 lawnmower. the problem was that it does not drive.

after taking it to a lawn mower mechanic i have been told that there is a problem with the transmission. the belt spins the pulley but does not drive the wheels. the pulley also comes completely out of the whole it sits in and the mechanic has told me that this should not be the case. the pulley does not looks broken or damaged. i have included pictures to help you help me.

.mower transmission.jpg20140630_194114.jpg20140630_194057.jpg


any suggestions or accounts of your experiences with these types of problems and how they were overcome would be very much appreciated.

please let me know if i can provide any other information.

thank you in advance


#2

EngineMan

EngineMan

Box needs to be taken apart to be sure but it look's if you have drop a circlip on the shaft, there is a member here who works for Honda, maybe he may help out with a part list, are the bearing(s) still OK..?

Look's like a HRD536 - Type: HXE Serial Number Start: MZBL8000001 - Serial Number End: MZBL8099999 I could be wrong..! can you post the numbers up.


#3

T

the_patriot

20140701_004440.jpg20140701_004251.jpg20140630_172626.jpg20140630_172634.jpgHello,

Thank you for the info EngineMan. Very much appreciated. Now that you mention it there are 2 grooves going along the chamber where the pulley shaft goes in. Maybe some kind of clip or something is supposed to go there?

Are these the numbers you were talking about?

Thanks again everyone and await your reply


#4

T

the_patriot

Uploaded the same pics

Here they are again showing the 2 grooves along the chamber. The grooves are parallel to each other if that helps

Attachments









#5

T

the_patriot

hello again guys,

another thing i remembered is that before i gave it to the mechanic it only use to move forwards and not backwards. apologies if i am making too many posts.

thanks


#6

EngineMan

EngineMan

Your next set of photos show that below the oil seal, there is a groove, which looks original and is V shape, key ways are normally square, need a part list to be sure, so wait until someone here comes up with one.


#7

robert@honda

robert@honda

the_patriot said:
hello everyone,

i hope you can help me. i have taken on project to help fix a honda hrd 536 lawnmower. the problem was that it does not drive.

after taking it to a lawn mower mechanic i have been told that there is a problem with the transmission. the belt spins the pulley but does not drive the wheels. the pulley also comes completely out of the whole it sits in and the mechanic has told me that this should not be the case. the pulley does not looks broken or damaged. i have included pictures to help you help me.

.View attachment 21828View attachment 21829View attachment 21830


any suggestions or accounts of your experiences with these types of problems and how they were overcome would be very much appreciated.

please let me know if i can provide any other information.

thank you in advance
Click to expand...

Everything appears to be excessively worn. The shaft should have not come out of the transmission, but could if has worn beyond its service life. This mower is a non-US model, and I don't have any parts or service details to share, sorry. I will guess this transmission is similar if not identical to the ones used in USA models, and it does not have any internal parts that can be replaced. I would say it is (past) time to fit a new transmission.

Abe, are you in the USA? If not, what is your location? I can give you contact details for a Honda distributor (if you are outside the USA) who might be able to obtain a replacement transmission.


#8

T

the_patriot

Hello,

Thank you for all your help. I live in west yorkshire, england, uk. Bad news about not being able to recon it but understandable. Please send me those details of a honda dealer. Everyones help has been much appreciated.

Thank you,


#9

robert@honda

robert@honda

the_patriot said:
Hello,

Thank you for all your help. I live in west yorkshire, england, uk. Bad news about not being able to recon it but understandable. Please send me those details of a honda dealer. Everyones help has been much appreciated.

Thank you,
Click to expand...

Abe, here's the link to find a Honda Lawn & Garden dealer in the U.K.:

[url]http://www.honda.co.uk/garden/findadealer/[/URL]


#10

T

the_patriot

thanks for that. guess ill be going down the replacement transmission root. will a second hand one be okay?


#11

EngineMan

EngineMan

the_patriot said:
thanks for that. guess ill be going down the replacement transmission root. will a second hand one be okay?
Click to expand...

If its in good working order I don't see why not, keep an eye on e-bay.


#12

T

the_patriot

thank you all. i owe you one. i hope i can help other people the same way i have been helped on here.


#13

T

the_patriot

20140630_194057.jpg20140630_194114.jpghonda hrd 536 hxe transmission.png

Update on my lawnmower problems. im still looking for the transmission to fit a honda HRD536 lawnmower - Type: HXE Serial Number: MZBL8006962

They are the same transmission I'm pretty sure as the hrb536c. I think the part number might be: 20001-ve5-a20.


ANY ADVICE ON WHERE TO FIND THIS PART FOR UNDER ｣100 IN THE UK WILL ALSO BE VERY MUCH APPRECIATED. What price are they like in america. That part number if anyone knows?


Footer Links 1

Top