!!!!! HELP !!!!! 50" Craftsman zero turn mower, remove upper pulley from crank shaft

Mutt

Member
Joined
May 21, 2014
Threads
4
Messages
27
  • / !!!!! HELP !!!!! 50" Craftsman zero turn mower, remove upper pulley from crank shaft
!!!!! HELP !!!!! 50" Craftsman zero turn mower, remove upper pulley from crank shaft

Can any one offer some much needed info here? I have a 50" Craftsman zero turn mower Model number 107277700
All but one motor mount bolt fell out, so 3 holes of the 4 are wallowed out. I can weld them up and redrill not a problem. So I removed the fuel tank and battery and all the sheet metal. Finally got it up on jack stands. Removed the bolt from the crank shaft and used a 3 jaw puller and the electric pulley cam right off without any problems. Removed the one motor mount bolt that was left, motor is free to move around. So then I went to remove the upper pulley. Removed the belt from the pulley and moved it out of the way. The 3 jaw puller will not remove the pulley. I checked for a set screw on the pulley and found nothing.Key is still in keyway. Would one of you professionals please give a clueless fella the info on how to go about removing this pulley? Is a shell puller what I need to use ????
 
Top