Gang of mowers

D

dat

Forum Newbie
To finish cut a field area, after brush hog cutting, I'd like to string a set of push mowers together. A Rube Goldberg kind of thing.

I routinely fix up used mowers, and have been doing this since 1966.
Now as a retired person, it is a hobby..

So, who has a good system for ganging mowers together?
 
:welcome:

:thumbsup: I'm going to move your thread over to our build it yourself section. Maybe someone over there might know.
 
An old neighbor did that with his lawn tractor and a couple of cheap pushers, a 2x4 and some rope for a 72 " cut. It sure made those 4 horses trailing on the right side eat a lot of hay with dirt / dust combined.
 

Attachments

  • Capture - gang mowers 2017.JPG
    Capture - gang mowers 2017.JPG
    51.5 KB · Views: 52
Grain drills have had that capability for over 60 years or ever since tractors were large enough to pull 2 drills.
 

Attachments

  • Capture drills.JPG
    Capture drills.JPG
    25.4 KB · Views: 20
At first I didn't think that this thread is for real...but now I'm intrigued! Don't have much to pitch in but I'll keep an eye on it!:thumbsup:
 
dat said:
To finish cut a field area, after brush hog cutting, I'd like to string a set of push mowers together. A Rube Goldberg kind of thing.

I routinely fix up used mowers, and have been doing this since 1966.
Now as a retired person, it is a hobby..

So, who has a good system for ganging mowers together?
Click to expand...

I used to pull a gang of reel mowers with a tractor while working at a golf course. Three large reels followed by two to fill the gap. These were commercial mowers of course.
 
You must log in or register to reply here.
Back
Top