Frustrating blade search for Ikon XD 52

robwcormack

Forum Newbie
Joined
Sep 4, 2020
Threads
1
Messages
3
I've had a heck of a time finding aftermarket blades for this thing. From an absurd amount of research, I believe the blades for mine should be the same as the ikon x, ikon xl, and gravely zt x (all 52 obviously) and I've looked for blades on all of those. I know the oem number of the blades is 04771200 which from what I've found has blade specs: Length: 18.00" - Width: 2.25" - 30 Degree .5 Offset - and 5/8" hole. I finally found a gator g3 blade that is the closest match I can come up with and I'm hoping some of the awesome experts on here can verify if the 93-601 blades should work.
 

Rivets

Lawn Royalty
Joined
Mar 11, 2012
Threads
55
Messages
14,683
My research tells me that the 04771200 blade DOES NOT cross to a Oregon 93-601. I could not find an aftermarket blade.
 

robwcormack

Forum Newbie
Joined
Sep 4, 2020
Threads
1
Messages
3
I know it doesn't come up is the cross reference that way. I was just hoping looking at the specs and how they match if maybe they would
 

Rivets

Lawn Royalty
Joined
Mar 11, 2012
Threads
55
Messages
14,683
Gravely doesn’t supply specs for its blades. You’ll need to take your blade, meas it and compare what you have to these specs.https://www.oregonproducts.com/en/blade,-bobcat,-gator-g3,-18%22/p/93-601
 

robwcormack

Forum Newbie
Joined
Sep 4, 2020
Threads
1
Messages
3
Gravely doesn’t supply specs for its blades. You’ll need to take your blade, meas it and compare what you have to these specs.https://www.oregonproducts.com/en/blade,-bobcat,-gator-g3,-18%22/p/93-601
The specs I put in the original post are actually the one for the oem blades on mine. Length: 18.00" - Width: 2.25" - 30 Degree .5 Offset - and 5/8" hole

These are very close to the specs for the Oregon I listed and you linked. Difference is that the oregon is 2.5 wide vs 2.25 oem, and the offset is the same but I don't know about that 30 degree part
 

Rivets

Lawn Royalty
Joined
Mar 11, 2012
Threads
55
Messages
14,683
30 degree is the angle of the cutting edge. Personally I would not use a blade that is a 1/4” wider, due to weight difference, but I’m sure he who is smarter than me will beg to differ. Remember you are spinning them at high speed, which will affect torque differences an possible bearing wear.
 

JeremyFOwens

Forum Newbie
Joined
Jun 17, 2017
Threads
1
Messages
4
I am in the same boat with my Gravely ZTX 52. What did you end up doing? Looks like I will have to settle for OEM replacement.
 

UFLBret

Member
Joined
Jul 14, 2021
Threads
1
Messages
10
This is what I bought from Amazon last year and they work perfectly, actually cut better than the ones that came on my ZTX-52 when i bought it new. copy/paste the below into amazon search bar:

Ariens 3PK Genuine OEM Gravely 04771200 52" Zero Turn Lawn Mower Blades​

 

StarTech

Lawn Royalty
Top Poster Of Month
Joined
Feb 19, 2020
Threads
75
Messages
10,112
Rotary 16289
Stens 355-606
 
Top