Front wheels not lined up and seem bent

[jrn497704]

Went up a curb on an angle and now the front wheels are not lined up and seem bent ie; when one wheel is straight the other is angling left or right. I have a Craftsman YTZ 4000 24 HP. Its a bit of a struggle keeping it straight. Is this an easy fix?

 

[pugaltitude]

Went up a curb on an angle and now the front wheels are not lined up and seem bent ie; when one wheel is straight the other is angling left or right. I have a Craftsman YTZ 4000 24 HP. Its a bit of a struggle keeping it straight. Is this an easy fix?

Find out where its bent and either bend it back or replace the bent part.

 

[reynoldston]

Find out where its bent and either bend it back or replace the bent part.

sounds to the point to me, good answer.

 

[wjjones]

Went up a curb on an angle and now the front wheels are not lined up and seem bent ie; when one wheel is straight the other is angling left or right. I have a Craftsman YTZ 4000 24 HP. Its a bit of a struggle keeping it straight. Is this an easy fix?

Its the link rod that goes from one side to the other take it off, and straighten it in a vice, etc. I have bent mine before too if you look at it under the mower if its bent it will be bowed upwards.