Exmark Radius E Wiring Help

[Brg4913]

Exmark Radius E
Electrical connection for my PTO clutch got caught in my belt and got ripped out of the connector. The black connector is fine but I have 4 loose wires and do not know where they go. Anybody know the proper wire orientation for that connector? /I have 2 black wires and 2 purple with red stripe?

 

[Rivets]

Post the model and serial numbers for your unit so we know what you are working on. We hate making guesses.

 

[Brg4913]

Post the model and serial numbers for your unit so we know what you are working on. We hate making guesses.

I added it.

 

[StarTech]

Quite simple.

Connect both Voilet/Red wires together and connect to one terminal of the clutch. Now connect both black wires together and connect to the other terminal of the clutch.

 

[Brg4913]

Quite simple.

Connect both Voilet/Red wires together and connect to one terminal of the clutch. Now connect both black wires together and connect to the other terminal of the clutch.

I tried the wires in both configurations and it did not work. Couldn’t have blown a fuse anywhere. The digital LED that shows hours and battery does not light up.
It’s not just the PTO.

 

[StarTech]

Yes you could have blown one or both fuses. Most likely it is the 15A one. Unfamiliar with the mower so I don't know exactly the fuse and relay box is but appears to be close to the battery.

Now it will look like this. You will have to open it up to get to the fuses and relay.

And this is the layout of the harness.