Drive pulley

[jb1071]

I have a Cub Cadet XT2 LX54. Trying to replace drive belt... strung through transmission and engine pulleys. It showed to remove tensioner pulleys. How do I get back on? Has plate below pulleys so can't see ....

 

[Catherine]

Welcome to the forum! I'm going to move this thread over to our Cub Cadet section. You should find some advice over there.

 

[StarTech]

You not going like this but it looks like the plate #10 needs to removed or partially removed and the belt install around the pulleys and the plate re-installed as idler bracket is install on it.

If you take either one the pulley nuts loose they need re-tighten to 252-275 in-lbs.