I have some nice body and chassis parts and other misc that are left over from my restoration if anyone is interested.
Larry
#2
Briana
Welcome to LawnMowerForum!
I moved your thread to the Private Party Ads forum. :smile:
#3
silver1
I have a LT 10 36. I need the throttle cable and the wiring harness.
I may also need the mower deck mandrels. I'm still trying to get it
running correctly as the carb. linkage was missing parts. I have them
now. LB
I have a LT 10 36. I need the throttle cable and the wiring harness.
I may also need the mower deck mandrels. I'm still trying to get it
running correctly as the carb. linkage was missing parts. I have them
now. LB
I used a generic throttle from the local equipment dealer for $15 and it worked fine on my LT8.
Harness on the 10 I am not quite ready to give up yet. Going to try to start the motor on th LT10 one more time before I dismantle the whole thing. What is a deck mandrel? I have a deck on the 10 but never used one and will be selling deck parts because I believe it is incomplete.
Larry
#5
silver1
It is the jack shafts. The deck has two. The belt on top, the blade on the bottom.
Don't need the harness. I got 1 from ebay. I need the steering sector gear and one
front light for my LT 11 36.
LB
It is the jack shafts. The deck has two. The belt on top, the blade on the bottom.
Don't need the harness. I got 1 from ebay. I need the steering sector gear and one
front light for my LT 11 36.
LB
OK, I will digest what you said about jack shafts because I don't know what they are either. I used the steering gear from the 10 for my LT 8 which had broken teeth. By light, do you mean bulbs or is there an enclosure? My 8 and 10 both have the light bulbs directly attached to the hood and they can be bought at an auto parts store.
