mr.farmall
Active Member
- Joined
- Mar 13, 2014
- Threads
- 12
- Messages
- 65
McCulloch leaf blower model " MAC 320BV" or 320BV. (blower vac). On the engine their is a label " C134" along with "CT M 32cc SMH032UB24RA EM".
I have no idea who made the engine!!
The engine starts right up runs as if it is flooding, then after about 1 minute, floods and wont start again until the plug is dried off.
I have disassembled the carb and cleaned it with an ultrasonic cleaner time after time. no change, it starts but won't rev up and then floods out after about 45 seconds with full throttle. let off the throttle and it kills.
The jets are turned most of the way to bottoming out, only 1/2 turn open. (this model has adjustable high and low needles).
This model carburetor, "c1u-m35a" is discontinued and not to be found in the market.
Zama makes a lot of variations of the "C1U" body of the carburetors, I was wondering if they are the same body and only have different attachments like the choke lever, throttle controls and such. If so I would like to order one and change my attachments over to the new body. But I don't know enough about them to be able to make that decision.
Maybe some one can point me on how to fix this flooding issue. Hopefully someone reading this can guide me a little or give a help on how to solve this problem and make it run again.
thanks in advance
Rex
I have no idea who made the engine!!
The engine starts right up runs as if it is flooding, then after about 1 minute, floods and wont start again until the plug is dried off.
I have disassembled the carb and cleaned it with an ultrasonic cleaner time after time. no change, it starts but won't rev up and then floods out after about 45 seconds with full throttle. let off the throttle and it kills.
The jets are turned most of the way to bottoming out, only 1/2 turn open. (this model has adjustable high and low needles).
This model carburetor, "c1u-m35a" is discontinued and not to be found in the market.
Zama makes a lot of variations of the "C1U" body of the carburetors, I was wondering if they are the same body and only have different attachments like the choke lever, throttle controls and such. If so I would like to order one and change my attachments over to the new body. But I don't know enough about them to be able to make that decision.
Maybe some one can point me on how to fix this flooding issue. Hopefully someone reading this can guide me a little or give a help on how to solve this problem and make it run again.
thanks in advance
Rex