Cutting height level pin

Philmaxwell

Forum Newbie
Joined
Oct 4, 2022
Threads
1
Messages
1
I just bought a DLT3000. My cutting deck lever has a 5/16" pin that goes into the slot to select cutting height.
But down on the handle's pipe, the slot in the pipe is so much wider that 5/16", I'd say it's close to 1/2" and so,
the 5/16" pin is at an angle, maybe 20 degrees, Are they all like this or do I have something missing? Maybe inside
the pipe, is there supposed to be a bushing?
 
Top