R RevPhil Forum Newbie Joined Jun 24, 2016 Messages 1 Jun 24, 2016 #1 I'm replacing a deck Spindle assembly on a 50" LTX deck. The spindle holes are untapped and usually self-tapping bolts are used for mounting. Is there some reason why the holes can not be tapped and normal bolts and lock washers used?
I'm replacing a deck Spindle assembly on a 50" LTX deck. The spindle holes are untapped and usually self-tapping bolts are used for mounting. Is there some reason why the holes can not be tapped and normal bolts and lock washers used?
reynoldston Lawn Pro Joined May 23, 2011 Messages 5,705 Jun 24, 2016 #2 Why not you are doing the same thing. I would use some blue Loctite.
ILENGINE Lawn Royalty Community Leader Joined May 6, 2010 Messages 12,035 Jun 24, 2016 #3 I have tapped the holes on more than one spindle over the years when the self tapping screws weren't available.
I have tapped the holes on more than one spindle over the years when the self tapping screws weren't available.
John R Well-Known Member Joined Mar 9, 2016 Messages 240 Jun 26, 2016 #4 Tap them and use a grade 8 bolts, never did like them self tapping bolts for spindles.
