I have a CMM 1200 that started stalling out frequently. It would restart after a 1-2 minute waiting period but might stall again in 1 minute or in 5. After reading forums I decided that the problem as likely the circuit breaker. I ordered a new one from 1800ToolRepair. After installing the problem resolved for approximately 2 months and now is back. My questions are as follows:
1. Did I get a bad part or is there something wrong with my mower that could be damaging the circuit breaker?
2. Is is worth replacing it again and if so should I risk the same supplier or try a different one?
3. How bad would it be to bypass the circuit breaker altogether?
Thanks for any advice or input!
1. Did I get a bad part or is there something wrong with my mower that could be damaging the circuit breaker?
2. Is is worth replacing it again and if so should I risk the same supplier or try a different one?
3. How bad would it be to bypass the circuit breaker altogether?
Thanks for any advice or input!