I just bought one of these and generally like it. However, I am mowing St Augustine grass in Florida and even with the deck height set at 5 (highest setting) it is too low. This grass is somewhat springy and the weight of the mower sits the cut height too low so the grass looks scalped. Has anyone tried putting taller wheels on on of these mowers To get the deck higher?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
CC30E cut height
- Thread starter KevMeist
- Start date
Thx. I’ll get my son to check. I’m out of the country at the moment. Would those pressures result in the tractor sitting at a slight angle?Have you checked that the tires are properly inflated? I recommend using 10 psi in the back and 20 psi in the front. Please post the model numbers for the unit, so we can see the adjusting mechanism.
Last edited:
Cutting every 6 days at the moment. Still cuts too short. St Augustine is not meant to be cut very short. Apart from that the mower has only been used 3 times.Cut more often.
Last edited:
Ok, thx. Will try. Already messaged my son back in FL.No, if properly inflated the tires help to obtain proper cutting height.
Take it back to Lowes or where you got it from.Cutting every 6 days at the moment. Still cuts too short. St Augustine is not meant to be cut very short. Apart from that the mower has only been used 3 times.