Brushes in starter
- Thread starter Dan1129
- Start date
bertsmobile1
Lawn Royalty
push the brushes fully inside the guides.
On some starters there is a hole in the guide that a pin goes in.
On Briggs they come with a U shaped piece of wire that pushes out when you push the armature through the bush,
On some starters there is a hole in the guide that a pin goes in.
On Briggs they come with a U shaped piece of wire that pushes out when you push the armature through the bush,
reynoldston
Lawn Pro
To begin with Kohler uses many different starter brands. To name a few Denso, Delco, United Tech, Laster, etc. :confused2:
reynoldston
Lawn Pro
I rebuilt a Denso a few week back. What I used was a small cotter key straighten out. I ran the cotter key through spring so the spring couldn't go flying and then installed one brush at a time till all four were installed. As I said I don't know what brand starter you have?