Blade Brake Arm Replacement...

[Autolite]

I am replacing the blade brake arms on an older model Sears 42" mower deck. The blade brakes are engaged with a pair helical coil springs. Does anybody have a photo of how the helical springs are mounted/installed on the blade brake arms?

I should have taken a photo before disassembly but instead decided to trust my memory. BIG MISTAKE!!!

 

[BlazNT]

Model number would help. I have a 42" deck in my garage but Im not digging it out unless they are close.

 

[Autolite]

Model number would help. I have a 42" deck in my garage but Im not digging it out unless they are close.

It's the same (or similar) model of deck being discussed in this link here.

http://www.searspartsdirect.com/par...021/0247/1509200/348360?modelNumber=917271021

The blade brakes use 'torsion' style springs. The link has the photos that I need to see but they won't load on my computer. If they load for anyone else perhaps you could re-post them here...

 

[BlazNT]

Best picture I could find.

 

[Autolite]

Best picture I could find.
View attachment 29472

Thanks for that. It is most appreciated!

I also found these pics from a YouTube video.