bent spindle

P

pat

Forum Newbie
We have an almost new John Deere D100. My husband must have hit a stump, because the shaft of driver for one blade is bent. Our dealer says we have to replace the entire mower deck for $500.

Can we just buy the spindle? (I see it on the blowup in the parts catalog, but I cannot figure out how to order it.)
 
Hello pat... & WELCOME to LMF...

I can think of a few words for the guy that wants you to buy a new deck... You might ask him if he also suggests replacing the deck when the blades need sharpened...
If the deck is not damaged, don't replace it...

The spindles can be ordered individually .
Or you can get a Mower Deck Rebuild kit that includes both spindles, pulleys blades and belt on eBay : John Deere D100 100 Series 42" Mower Deck Rebuild Kit | eBay

OR just the one spindle at : John Deere Spindle Assembly - GY21098

Also you need to find a different dealer, if he told you this based on you wanting to buy a replacement spindle... :smile:KennyV
 
You need a new dealer for sure. KennyV is right you should be able to buy any part you need for the deck. John Deere is very good about looking up parts and you should be able to look up the part numbers on line. You will need the model and serial off the tractor.
 
Not only do you need a new dealer ----- See if you can find a regional manager and tell them about this rip off artist representing Deere. :thumbdown: Check out the Deere web site and see who you can contact.

Good Luck !
 
Hey there - WELCOME to LMF!

I moved your thread to the Small Engine & Mower Repair Forum. :smile:
 
You must log in or register to reply here.
Back
Top