B&S on a DC silver eagle wiring & misc help

[Preston1977]

You

Hope you survived the storm.
The grey should go battery voltage with the ignition turned on
If so it goes the solenoid on the carburettor .

The black should be open circuit to ground with the ignition turned on & ground when the ignition is turned off and if that is the case it goes to the magneto .
The red will be battery voltage and goes to the rectifier

You were spot on dude, very much appreciate the help! Now I just have to figure out the pulley and belt lay out.

 

[bertsmobile1]

They should be exactly the same

 

[Preston1977]

They should be exactly the same

They pulleys weren’t attached when I picked up the DC. I’m pretty certain I have it figured out I’m just waiting on the springs for the 2 tension pulleys to get here