B&S HYDROLOCKED

muddy51

Member
Joined
Jan 16, 2017
Threads
3
Messages
19
my old 10hp snapper hydrolocked once. I hadn't started it in about a week. Electric starter wouldn't turn the engine over so I put the battery charger on it. Hmmm....acts like the battery isn't dead.
So I pulled the dipstick andit had about a pint of "extra" oil. I had forgotten to close the inline fuel valve. First I removed the spark plug, then cleaned the needle and seat, then changed the oil and then reinstalled the spark plug. it started right up and ran fine
 

CaptFerd

Active Member
Joined
May 19, 2014
Threads
6
Messages
64
By the Model provided it has over head lifters. Put your old carb back on and adjust the lifters. Make sure they are getting good lift that the cam is not worn. Happed to mine. Couldnt hardly pull the rope it was so hard.
 

7394

Lawn Pro
Joined
Sep 5, 2014
Threads
88
Messages
5,049
Old craftsman hydrolocked on me long ago, I removed the spark plug & hit the key, gas shot out like crap thru as goose.

I changed the oil a couple times after I got the piece of crud outta the carbs' needle valve, & added a shutoff petcock.
 

slomo

Lawn Pro
Joined
Jul 14, 2019
Threads
78
Messages
5,047
Most people will run the engine in a flooding condition and rely on a shutoff to kill the motor. Basically not fixing the needle.

slomo
 
Top