Travlitt
Member
- Joined
- Apr 13, 2013
- Threads
- 5
- Messages
- 34
My snapper ztr with a Briggs and Stratton 27 HP 2 cylinder engine. Model # 49T877-0025-G1.Cranks but will not start. No spark to either plug. If I disconnect both kill wires at the coils, it will start and run ok. If I reconnect 1 of the kill wires, it will cause that cylinder to miss, same with either cylinder. If I re-connect both kill wires it will lill the engine. What do I need to do to correct this problem.