Export thread

54" x one not moving forward or backward

#1

Murciag

Murciag

Hi I have a 54" hustler x one with hydraulic pumps. Just one day he diced not to move forward or backwards, I replace al O-rings from the hydraulic pumps and tide well al nuts. But still not moving like it loose all the pressure. If someone can help me to identify the reason why this is happening.


#2

R

rick.kinney

Murciag said:
Hi I have a 54" hustler x one with hydraulic pumps. Just one day he diced not to move forward or backwards, I replace al O-rings from the hydraulic pumps and tide well al nuts. But still not moving like it loose all the pressure. If someone can help me to identify the reason why this is happening.
Click to expand...
If you tried bleeding the pumps by jacking it up and pouring enough fluid in until it runs out of the top bleed screw then the caps under the pump where the o-rings are, require turned around. mark them with a marker to make sure you turn them around. then follow bleeding procedure.


Footer Links 1

Top