54" x one not moving forward or backward

Murciag

Forum Newbie
Joined
Jan 13, 2020
Threads
1
Messages
2
Hi I have a 54" hustler x one with hydraulic pumps. Just one day he diced not to move forward or backwards, I replace al O-rings from the hydraulic pumps and tide well al nuts. But still not moving like it loose all the pressure. If someone can help me to identify the reason why this is happening.
 

rick.kinney

Member
Joined
Apr 2, 2019
Threads
0
Messages
13
Hi I have a 54" hustler x one with hydraulic pumps. Just one day he diced not to move forward or backwards, I replace al O-rings from the hydraulic pumps and tide well al nuts. But still not moving like it loose all the pressure. If someone can help me to identify the reason why this is happening.
If you tried bleeding the pumps by jacking it up and pouring enough fluid in until it runs out of the top bleed screw then the caps under the pump where the o-rings are, require turned around. mark them with a marker to make sure you turn them around. then follow bleeding procedure.
 
Top