4x4 lawn tractor

Could always just do something like this not 4wd but very cool

image-3060381011.jpg

Sent from my iPhone using LMF
 

Attachments

  • image-1970703913.jpg
    image-1970703913.jpg
    48.6 KB · Views: 46
Ventrac are expensive :/ And looking at this project it is looking like this will be a lot more involved than welding an axle and running a belt >.< am quickly losing motivation and probably wont do it. The whole front axle will need to be custom because of the steering and the shifting would need some minor but still fabricating. Although i have not lost all motivation ill grab a beer and head out there in a little while
 
Go on you tube and look up FEARLESSFRONT He can build any thing out of a mower

Sent from my iPhone using LMF
 
The hard part building a 4wd mower is getting the gears to be right. You can take the rear and front ends from a ATV bit then it's not really a mower any more. You can take the rear end and put it on the front and make the whole thing pivot but you would have to mount it upside down so the wheels would turn forward. And run a double pulley off the engine.

I have all the parts going to start on it next month I will post pics of the whole build.

Sent from my iPhone using LMF
 
Carscw said:
The hard part building a 4wd mower is getting the gears to be right. You can take the rear and front ends from a ATV bit then it's not really a mower any more. You can take the rear end and put it on the front and make the whole thing pivot but you would have to mount it upside down so the wheels would turn forward. And run a double pulley off the engine.

I have all the parts going to start on it next month I will post pics of the whole build.

Sent from my iPhone using LMF
Click to expand...

Can't wait to see it! :thumbsup:
 
Carscw said:
The hard part building a 4wd mower is getting the gears to be right. You can take the rear and front ends from a ATV bit then it's not really a mower any more. You can take the rear end and put it on the front and make the whole thing pivot but you would have to mount it upside down so the wheels would turn forward. And run a double pulley off the engine.

I have all the parts going to start on it next month I will post pics of the whole build.

Sent from my iPhone using LMF
Click to expand...

Me too can't wait.
 
You must log in or register to reply here.
Back
Top